2 in1 CNC USB Mach3 4 Axis TB6600 Stepper Motor Driver Controller Board 200KHz

Description

template
TB6600 CNC 4 Axis USB Mach3 Stepper Motor Driver Controller Board 200K 2In1
Brief introduction:
DDMDTV1.0 is a CNC system based mach3.It's version is 1.0 now.
up to 5 axes stepper-motor control port. Each port has up to 200KHz plus output；
New design Aluminum cooling make the system more stable；
There are High speed interface chips,which make stepper driver signal more stable.
This system is equipped with RS2332 manual control box. You can use manual control box with this port.
The stepper driver is TB6600.
Requirements of Computer:
Basic Configuration：
CPU：1GHz；
Memory：512MB
500MB Available disk space
USB 2.0
Recommended configuration：
CPU：2GHz Dual Core；
Memory：2GB；
1G Available disk space
USB 2.0
Features:
Simultaneously control 4 stepper motors.
USB communication interface, and power supply for the board；
11 IO input, opto-isolated， It Can be configured to limit the emergency stop and other functions
2 IO output with opto-isolated for spindle can be configured to EN and DIR.
up to 5 axes stepper-motor control port. Each port has up to 200KHz plus output；
COTEX-M3 of NXP-LPC is main control chip；
New feature:
New design Aluminum cooling make the system more stable；
This system is equipped with RS2332 manual control box.
Equip control panel.
Spindle control port has PWM Mod（0%-100% dutycycle with 12Vpp）and voltage Mod（0-10V）
Spindle speed feed back port-INDEX.
There is a power autostability system.
There are High speed interface chips
There is a USB protection chip,which can protect system within high voltage EMI；
With TB6600 stepper motor driver(10: 4-channel, 4A ,16 subdivision )
Parameters:
System input voltage: 5V；
Operating voltage of input interface with opto-isolated：12V；
Operating voltage of output interface：5V
stepper motor control signal output voltage：5V；
Spindle Signal：10V
1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by buyers.
3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges. These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
What's in Package:
1 x 4 Axis TB6600 Driver+Controller 2in1 Board
1 x USB Cable
Contact Us:
1. We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please contact us to resolve any issue before leaving a negative feedback.
2. Please contact us by "Ask a question".
Payment
1. Payment methods accepted :
Paypal
only
.
2. Payment must be received within 7 business days of auction closing.
Shipping
1. We ship your orders within 1-3 business days after the payment received.
2. Item shipped via Singapore Post or HongKong Post , It takes about 7-30 business days (USA,CA,AU,UK).others country 10-20 business days(Brzil,India,RU),Exact delivery time depends on postal process.
3. If you do not receive your item(s) by 30 business days,Please feel free to contact us via ebay mail system , we will try our very best to resolve any problems with you
Return Policy
1. Return is accepted within 30 days after the buyer's receiving the item.
2. If this item is defective upon receipt, customer has up to 14 days from date of receipt for exchange of a new one.
3. Unused/unopened merchandise will be fully credited.
Other Policies
We are not responsible for any custom duty or import tax.
If you need we write low price on shipping bill, pls leave message when you make payment .
All emails will be answered within 24 hours. If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible, Suggest send eBay message to us, That is easy to find .