4 Axis CNC Stepper Motor TB6560 Board Controller Driver NEMA23 Kit Mach3 360W

Description

TB6560AHQ 4 Axis CNC Stepper Motor
Controller Driver Board
NEMA23 Kit Mach3 360W 24V 15A Power Supply
Toshiba
TB6560AHQ
chip - High power, maximum 3.5A drive current chipset
1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step
Full closed-type optical isolation to protect the user's computer and equipment
Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment
On board current switching - Power output can be set according to specific user requirement
Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output)
4 channel inputs interface- Can be used for XYZ limit and emergency stop
Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop
Professional design - Two stage signal processing with super anti- jamming
Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect
Universal architecture - Supports most parallel software MACH3,KCAM4 etc
Dip settings:
Current Setting
1
2
Decay Mode Settings
3
4
MicroStep Settings
5
6
100%
ON
ON
FAST
ON
ON
1
ON
ON
75%
ON
OFF
25%
ON
OFF
1/2
ON
OFF
50%
OFF
ON
50%
OFF
ON
1/8
OFF
OFF
25%
OFF
OFF
SLOW
OFF
OFF
1/16
OFF
ON
Important Notes:
Power supply DC 12-36V
(not included)
*Voltage Selection:
12-16V DC power supply for Nema 17 stepper motors
16-24V DC power supply for Nema 23 stepper motors
24-36V DC power supply for Nema 34 stepper motors
(High voltage will burn up the chips or stepper motors!!!)
*Ampertage Selection:
Output current of the power supply can be calculated by the following expressions:
Output current = Rated current of your stepper motors * quantity + 2A
(For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power supply is recommended, but higher power such as 24V 15A also will be good.
If you are not sure about the selection of power supply, please feel free to contact us for help)
The power output of 12V shall be applied to the radiator fan of 12V
Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
Suitable for unipolar or bipolar stepper motors.
Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.
Note:Your valid phone number is very important for the shipping,please provide it when you order.
All the packages
shipped to Russia require receiver's full name
for delivery purpose. Please update your full name on paypal if the order is shipped to Russia. Thank you!
57BYGH56-401A Stepper Motor(1.2N.m 2.8A）
Shaft Radial Play: 0.06Max.(450g-load)
Shaft Axial Play: 0.08Max.(450 9-load)
Step Angle Accuracy: ±5%(full step, no load)
Resistance Accuracy: ±10%
Inductance Accuracy: ±20%
Ambient Temperature: -10℃-+50℃
Temperature Rise: 80℃CMax.(ratod current,2 phase on)
Dielectric Strength: 500V AC for one minute
Insulation Class: B
Note:
Your valid phone number is very important for the shipping,please provide it when you order
!
Any customs duty applied to the parcel should be covered by the buyer.
As has been stated on the eBay item description, Import duties,
taxes and charges are not included in the item price and shipping charges.
These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
The product can be shipped by DHL or other Express, but a surcharge of US will be applied on the shipment when your location is remote. Remote is defined as islands and highlands; or a post code/zip code that is difficult to serve; or a suburb/town that is distant, inaccessible or infrequently served.
Note:
We are looking forward to a further extension of pleasant business relation. If you have any questions after receiving the goods or need something, please contact us,we will do our best to make you satisfied.
1 x 4 Axis TB6560 Driver Controller Board
4 x 57mm 57BYGH56 1.2N Stepper Motors
1 x 350W 24V Power
Shipping
1.Item will be shipped within 3 business days of cleared payment via Post Airmail.
2.Only shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
3.Usually takes 7-20 business days to most Countries: US, Canada, UK, Australia and Europe.
4.Optionally, Express Shipments with tracking service via EMS/DHL/UPS with a quoted delivery time of 5 to 7 business days is also available .
Payment
We ONLY accept Paypal.go to
paypal
account
Any customs duty applied to the parcel should be covered by the buyer.
eCheque will be held until cleared
We appreciate prompt payment and look forward to your business in the future.Unpaid item will be filed without receiveing payment in 7 days from listing ended.
Warranty
This item is ALL BRAND NEW and in the original factory box and packing,All products have been checked and packaged in good condition before dispatch.
12 months Manufacture's Warranty for defective items (excluding items damaged and/or misused after receipt)
Defective items Must BE reported and returned to us within the warranty period(and the original package.).we will give you a return ID.Meanwhile Please tell us what the defect is,to eliminate improper use.
Return shipping fee be responsible from buyer