4 AxisCNC Kit 5Axis Breakout Card 5A TB6600HG Controller 2.5Nm Nema23 Motor 36V

Description

4 AxisCNC Kit 5Axis Breakout Card 5A TB6600HG Controller 2.5Nm Nema23 Motor 36V
Only
USD
+P&P USD
*
/6
Description
4 Pieces 5A 45VDC TB6600HG Microstep Drivers + 5 Axis Breakout Board
4 Pieces Nema23 2.5Nm/354 Oz-in Stepper Motors + 2 Pieces 36V10A Switching Power Supply
Descriptions
The latest upgraded salable 5 axis breakout board is specially designed for the CNC Microstepper driver controller, such as TB6600HG, M542, M542H, MA560, MA860H, 2M542, 2M982 etc single axis stepper driver controller. With this 5 axis breakout board, any 1-5 Microstepper driver controllers can be directly controlled by the PC via MACH3, EMC2, KCAM4, etc..
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within
0.2-5 amps
, all the
2 Phase or 4 Phase of Nema17, Nema23, Nema24 stepper motors
will work perfectly with this new-type TB6600HG Stepper Driver.
Features
I. 5 Axis Breakout Board
High performance, cost-effective.
Maximum support 5-axis stepper motor driver controller.
Two types of ways to get power, 5V DC power supply or USB port to directly get power from PC.
Two-stage signal processing, smooth signal transmission, powerful anti-jamming.
5-input interfaces
to define the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc.
Relay output control interface
, accessed by the spindle motor or the air pump, water pump, etc.
5-axis work LED display, visually display the working condition of the stepper driver controller.
II. TB6600HG Stepper Driver Board Controller
High performance, cost-effective.
Automatic idle-current reduction
.
Supply voltage up to
45V DC
.
Output current up to
5.0A
.
Suitable for 2-phase and 4-phase motors.
High speed optoelectronic isolation signal input.
Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.
Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
III. Stepper Motor 57BYGH112-401A
Applications
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc..
For processing various pattern mould.
This kit is suitable for below typical CNC machines.
TB6600HG DIP-Switch Settings
Output
Current
SW1
SW2
SW3
Microstep
Mode
SW4
SW5
SW6
0.2A
ON
ON
ON
N/A
ON
ON
ON
0.6A
OFF
ON
ON
1(Full Step)
OFF
ON
ON
1.2A
ON
OFF
ON
2
ON
OFF
ON
1.8A
OFF
OFF
ON
2
OFF
OFF
ON
2.5A
ON
ON
OFF
4
ON
ON
OFF
3.3A
OFF
ON
OFF
8
OFF
ON
OFF
4.2A
ON
OFF
OFF
16
ON
OFF
OFF
5.0A
OFF
OFF
OFF
N/A
OFF
OFF
OFF
Interfaces
(3G 5 Axis Breakout Board)
(TB6600HG Stepper Driver)
Connection Diagrams
(Breakout-Board-Wiring)
(TB6600HG-Wiring)
Specifications
Electrical Specifications of 5 Axis Breakout board
Input Voltage
5V DC via power adapter or directly get power from PC via USB port
Drive type
Pulse + Direction + Enable Signal Control
Suitable Microstep Driver
2 Phase, 3 Phase, 4 Phase Microstep Driver (M542/M542H/MA860H/3MA2290 etc.)
Net weight
Approx 80g
Dimensions
90*82*15mm(L*W*H)
Electrical Specifications of TB6600HG Stepper Driver
Input Voltage
12V ~ 45V(Peak) DC
Output Current
0.2A ~ 5.0A (Peak)
Drive Type
Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper)
Suitable Motor
Nema17, Nema23, Nema24(Rated current: 0.2A-5.0A)
Operationg Environment & Other Specifications of TB6600HG Stepper Driver
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0 °C ~ 50°C (32°F ~ 122°F)
Humidity
40%RH ~ 90%RH
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20 °C ~ 65°C (-4°F ~ 149°F)
Total Weight
Approx. 300g
Dimensions
105*85*35mm
Specifications of Switching Power Supply
Input Voltage
90-132VAC/180-264VAC by switch
Input Frequency
47~63Hz
Output Voltage
36V
Total Current
10A
Vout Adjustable Range
36V±10%
Size
215*115*50mm
Weight
1100g
Specifications of Stepper Motor
Model
57BYGH112-401A
Shaft
Single Shaft (Diameter:8mm; Length:21mm)
Rated Current
3.0A/Phase
Rated Voltage
6.0V
Step Angle
1.8°±5%
Phase
2 Phases
Phase Resistance
2.0x(1+10%)Ω/Phase
Phase Inductance
7.5x(1+20%)mH/Phase
Holding Torque
2.5Nm (Approx. 354 Oz-in)
Positioning Torque
600gf.cm
Insulation Resistance
≥100MΩ (500VDC)
Insulation Class
Class B
Weight
1.6Kg/Piece
Content
Estimated Delivery Time
(Subject to Stock Availability)
USA (excl. Alaska, Hawaii, Puerto Rico)
USPS First-Class Package/ UPS SurePost/ UPS Ground
3-7
business days
Other Countries
(May depart from other stock location)
International Airmail Service
12-21
business days
Please DO CONTACT AND CONFIRM with us BEFORE you bid IF you:
• Need the item urgently.
• Require that the item should be delivered within a certain time.
• Have any other questions/requirements about delivery.
Remarks
• Usually, your order will be dispatched before the next working day after the full payment is cleared when stock lasts.
• Notification will be sent after your order is dispatched, please check you email or ebay order records for date of dispatch.
• It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.
• Please contact us if you have any trouble in receiving your orders. We will help you to track them.
Safe and Easy Payment
PayPal
• We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with
NO surcharge
)
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
Remarks
• Payment is required
within 5 days
after auction ends.
• All sales are final. Shipping and handling charges are not negotiable.
• Your
PayPal shipping address will be used for delivery BY DEFAULT
unless otherwise informed.
• Please double-check to make sure your PayPal shipping address is correct before making payment.
Satisfaction Guaranteed
30 Days Money Back Guarantee
If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message)
within 30 days
of receipt of goods for return & refund guidance.
Free Replacement
If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
We provide
ONE YEAR warranty
on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
• All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement
: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.
Image Gallery
Description
Specification
What's In
Service