5 x DRV8825 Stepper Motor Driver with Heat Sink for DIY 3D Printer Reprap

Description

Package Includes:
5*A4988/DRV8825 Stepper Motor Driver
5*Heat sink
Introduction:
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
Features:
Simple step and direction control interface
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Can interface directly with 3.3 V and 5 V systems
Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
Short-to-ground and shorted-load protection
4-layer, 2 oz copper PCB for improved heat dissipation
Exposed solderable ground pad below the driver IC on the bottom of the PCB
Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
45 V maximum supply voltage
Built-in regulator (no external logic voltage supply needed)
SHIPPING
ABOUT US
PAYMENT
RETURNS
CONTACT
WARRANTY
48 HOURS SHIPPING OUT
SHIP FROM Kentucky & California WAREHOUSE
Found in 2005, STEPPERONLINE is mainly engaged in stepper motors, DC brushless motors, stepper motor drivers, switching power supply, etc. Our products are widely used in medical instruments, robotics, 3D printers, extruders, laser cutters, engraving machine, textile equipment, packaging machinery, CNC machines, etc. Products are mainly exported to North America, Europe.
Based on a sound supply chain, thousands of products can be ensured to have sufficient inventory and sent out at any time. So far, we have warehouses located in the United States, Germany, United Kingdom, Australia and Russian Federation, allowing us to provide effective services.
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
You can return your merchandise in unused, resalable condition within 30 days of purchase.
All emails will be responded to within 12-24 hours
Our product have one-year warranty.
If there are any problems or issues with products,please don't hesitate to contact us at any time. We will help you resolve it.