CNC Kit 4 Axis TB6560 Stepper Driver 2.5Nm Nema23 Motors For Router And Milling

Description

Frist-Supply
World Shipping
Money Back Guarantee
CNC Kit 4 Axis TB6560 Stepper Driver 2.5Nm Nema23 Motors For Router And Milling
/8
Description
The Latest 3rd Generation Revolutionary & Standard TB6560 4 Axis Stepper Driver Box Set (TB4CD-S (Box))
+ 4 x Nema23 2.5Nm/354 Oz-in 57BYGH112-401A Stepper Motors
+ 1 x 360W 24V15A Switching Power Supply
I: PCB Instructions & Specifications
Descriptions
The latest 3rd generation TB6560 Stepper Driver has been upgraded to the intelligent, professional and
industrial-level drive set
by
re-designing
the PCB board,
embedding
intelligent
memory chip
(professional version) and
upgrading
the external manual control tools (control pad and display panel).
Actually, the 3rd generation TB6560 Stepper Drivers have two types of versions, one is the
standard version
, and another is the
professional version
. Compare to the standard version, the professional version mainly has two more functions than the standard version, one is the “
computer G-code recording function
”, and another is the “
manual programing function
”. Except these two functions, these two types of versions have no other differences.
Firstly, both of these two types of versions have upgraded their PCB boards, the re-designing the PCB board will avoid the TB6560 chip on the board being easily blown as the previous version.
With the embedded intelligent memory chip, the professional version of this 3rd generation 4 Axis TB6560 Stepper Driver can easily
record the G-code running
on the CNC software (e.g.
Mach3, EMC2, KCAM4
, etc..) of the computer, and then
rerun the recorded G-code
to make the stepper motor work without the computer any more.
Furthermore, the upgraded external manual control tools (display panel and control pad) on the professional version can be not only used for manually controlling the stepper motor, but also
manually programming the G-code
. All the manually Programmed G-code will also be recorded in to the embedded intelligent memory chip, and then we also can easily run the recorded G-code to control the stepper motor. Considering that the computer G-code recording function is enough for all the three axis working without computer, to avoid repeated function, the manual programming function is mainly designed for one axis to make linear motion, therefore, the three axis cannot be manually programmed simultaneously. This function is widely used on working which just need one Axis, such as RBI machine, Conveyor etc.
Lately, both of these two types of versions adopt the totally enclosed
optical isolation
and
bipolar constant-current chopper
to insure working at low noise & vibration, and avoid creeping at a low speed. It is very suitable for driving the 2-phase and 4-phase hybrid stepping motors.
In short, the qualities and functions of the new 3rd generation advanced 4 Axis TB6560 Stepper Driver are revolutionized from the previous version. So, we believe that these two types of versions must satisfy different users on CNC DIY.
The item you are watching is the
4 Axis Standard Version (TB4CD-S (Box)) CNC kit with stepper motors and power supply
, if you need the other versions, please feel free to contact with us.
Features
High performance, cost-effective.
Automatic
idle-current reduction
.
To manually control the stepper motor, both of the standard and professional drivers have been
equipped with the display panel and control pad
.
Automatically identify both of the computer and control pad, functions of the computer and control pad can be
switched intelligently
for each other without any interference.
Display panel can
real-time trail the running path of G-Code
on the computer or input by the control pad, and then completely and Simultaneous display the changing of each axis'(X, Y, Z axis etc.) values on its screen.
Both of the standard version and professional version are compatible with the
Mach2, Mach3
(
Default Software
),
LinuxCNC(EMC2), KCAM4 CNC Software
, etc.. Besides, the professional version also can automatically trail the path running path of G-Code from the CNC software (e.g.
Mach3, EMC2, KCAM4
, etc.) of the computer and
record the G-code
into the memory chip; Easy to repeatedly run the G-code to control the stepper motors without computer.
The professional version also support
manual programming
via the control pad, as long as input the required values on one axis and record them in the memory chip of the driver, and then run these recorded values to drive the axis to make linear motion, widely used on RBI machine, Conveyor and so on.
Automatically finish Tool-settings
on X, Y, Z Axis via the control pad, without the support of the computer.
Compatible with all the motors with
0.5A-3.5A
(peak) rated current, four types of adjustable output current can be set on the driver board.
1, 2, 8, 16 adjustable microstep control, motors run more precisely and smoothly.
Overload, overcurrent, overvoltage, overheat protection to avoid damaging your computer and devices.
Totally enclosed
optical isolation
and
bipolar constant-current chopper
to insure motors work at low noise & vibration, and avoid motors creep at a low speed.
With one
0-10V PWM Signal output
port for speed adjustment and one Relay control port.
5 types of input control in manual control interface, to set
Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting
etc...
Cooling Aluminium & high intensity PVC Box Design
for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
Applications
For processing various pattern mould.
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc...
For carving portrait, scenery, handwriting, sealing, etc...
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
Dip Switch Settings
II: DIP Switch Settings
Microstep Resolution Selection
Microstep Resolution
SW1
SW2
1
ON
ON
2
OFF
ON
8
OFF
OFF
16
ON
OFF
Decay Mode (Buffer) Selection
Decay Mode (Buffer)
SW3
SW4
25%
ON
ON
50%
OFF
ON
75%
ON
OFF
100%
OFF
OFF
Output Current Selection
Output Current
SW5
SW6
100%
ON
ON
75%
OFF
ON
50%
ON
OFF
25%
OFF
OFF
Note
: If the drive board has abnormal noise under working or locking condition, you can solve the problem by adjusting the decay mode.
Further Details
DC 12-32V power supply selection
Voltage Selection:
12-16V DC power supply for Nema 17 stepper motors
16-32V DC power supply for Nema 23 stepper motors
(High voltage will burn up the chips or stepper motors!!!)
Current Selection:
Output current of the power supply can be calculated by the following formula:
Output current = Rated current of your stepper motors * quantity + 2A
(For example, if you want to drive 3 * 2A Nema 23 stepper motors, theoretically 24V 8A DC power supply is recommended, but higher power such as 24V 10A/15A also will be good. If you are not sure about the selection of power supply, please feel free to contact us for help.)
Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board
Connection Diagram For Reference
III: Connection Diagram
Specifications
Electrical Specifications Of Stepper Driver
Input voltage
12V-36V DC
Output current
0.5A-3.5A (Peak)
Drive type
Pulse + Direction + Enable Signal Control (Bipolar constant-current PWM output)
Suitable motor
Nema17, Nema23, Nema24
Net weight
725g (Driver)
Dimensions
177*173*46mm
Operationg Environment & Other Specifications Of Stepper Driver
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0°C-50°C (32°F-122°F)
Humidity
40%RH-90%RH
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20°C-65°C (-4°F-149°F)
Total Weight
Approx. 840g (Driver + Control Pad + Display Panel)
Specifications Of Power Supply
Input voltage
100-120V AC and 200-240V AC
Input frequency
50/60hZ
Output voltage
24V
Total current
15A
Vout adjustable range
24V±10%
Size
210*115*50mm
Weight
1100g
Specifications Of Stepper Motor
Model
57BYGH112-401A
Shaft
Single Shaft (Diameter:8mm; Length:21mm)
Rated voltage
6.0VDC
Rated current
3.0A/Phase
Step angle
1.8°±5%
Phase
2 Phases
Phase resistance
2.0x(1+10%)Ω/Phase
Phase inductance
7.5x(1+20%)mH/Phase
Holding torque
2.5Nm (Approx. 354 Oz-in)
Positioning torque
600gf.cm
Insulation resistance
≥100MΩ (500VDC)
Insulation class
Class B
Weight
1.6Kg/Piece
Content
1 x The 3rd Generation 4 Axis TB6560 Stepper Driver With Aluminium Box (
Standard Version
)
1 x Built-in Control Pad (
Standard Version
)
1 x Built-in Display Panel (
Universal
)
4 x 57BYGH112-401A Stepper Motors
1 x 24V15A Power Supply
1 x LPT Parallel Cable
1 x CD Driver
Shipping
Payment
Service
Estimated Delivery Time
(Subject to Stock Availability)
Country/Region
Standard
(Business Days)
Express
(Business Days)
USA, Canada
5 - 10
3 - 5
Australia, New Zealand, South Asia, East Asia
7 - 12
3 - 5
UK, France, Germany and Other EU Countries
(excluding Italy)
7 - 15
4 - 6
South America, Italy, Other Countries/ Regions
15 - 25
varying
We sell items to most countries of the world. To provide the most satisfying shipping experience, your order may be allocated to and processed in the best-match fulfillment center.
Remarks
• Usually, we dispatch your order within
ONE WORKING DAY
upon receipt of full payment when stock lasts.
• Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
•
For fixed-time delivery or any special needs
, please do contact and confirm with us BEFORE placing order.
Safe and Easy Payment
PayPal
• We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with
NO surcharge
)
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
Remarks
• Payment is required
within 5 days
after auction ends.
• All sales are final. Shipping and handling charges are not negotiable.
• Your
PayPal shipping address will be used for delivery BY DEFAULT
unless otherwise informed.
• Please double-check to make sure your PayPal shipping address is correct before making payment.
Satisfaction Guaranteed
30 Days Money Back Guarantee
If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message)
within 30 days
of receipt of goods for return & refund guidance.
Free Replacement
If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
We provide
ONE YEAR warranty
on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
• All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement
: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.
Image Gallery
Description
Specification
What's In
Service