CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for

Description

30 Days Return Policy
Fast Delivery
Trusted seller
CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for
Product Description
Industrial-grade Stepper Driver
Suit for Nema 17 and 23 Stepper Motor
1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
This driver is an industrial-grade fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with other analog or TB6600 chips driver, it can drive a stepper motor at much lower noise, lower heating, and smoother movement. * Anti-Resonance provides optimal torque and nulls mid-range instability * Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors * Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement * 15 selectable microstep resolutions: 1/2, 1/4, 1/5, 1/8, 1/10, 1/16, 1/20, 1/25, 1/32, 1/40, 1/50, 1/64, 1/100, 1/125, 1/128 * Soft-start with no “jump” when powered on * 8 selectable peak current including 1.00A to 4.20A * Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input * Automatic idle-current reduction * Suitable for 2-phase and 4-phase motors * Support PUL/DIR mode * Over-voltage and over-current protections * Output Peak Current: 1.0~4.2A (3.0 RMS) * Input Voltage: +20~50VDC (Typical 36VDC) * Logic Signal Current: 7~16mA (Typical 10mA) * Pulse Input Frequency: 0~200kHz * Pulse Width: 2.5μS * Isolation Resistance: 500MΩ * Cooling: Natural Cooling or Forced cooling * Environment: Avoid dust, oil fog and corrosive gases * Operating Temperature: -10℃~45℃ * Vibration: 10-55Hz / 0.15mm * Weight: Approx.210g (7.4oz) 1 x Stepper Driver DM542T 1 x Full DM542T Driver Manual
Shipping
Returns
Payment
Shipping
Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states. All our stock ships from US-based warehouses. Shipped via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24-72 hours of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer.
Returns
As our valued customer, we will do our best to make sure the product you receive arrives to you on time and as expected. If you are not satisfied with your purchase, please contact us within 30 days of receiving your order to process a return.
Payment
We currently accept payment via PayPal only. Once payment is cleared, we will dispatch your shipment within 1-3 business days. Please refer to the "Shipping" tab for more information regarding shipping speed to your destination.