DIY CNC Mill Kit 4 Axis 1.26Nm Nema23 Motors + M335 Microstepper Drivers 3.5A

Description

DIY CNC Mill Kit 4 Axis 1.26Nm Nema23 Motors + M335 Microstepper Drivers 3.5A
/6
Description
4 x 3.5A 30VDC M335 Microstep Drivers + 1 x 5-axis Breakout Board
4 x Nema23 1.26Nm/175 Oz-in Stepper Motors + 1 x 24V 15A Switching Power Supply
Descriptions
The 5-axis breakout board is specially designed for the CNC 2-phase stepper driver controller. The breakout board uses high-performance three-state driver 74HC244 and Schmitt inverter 74HC14. The amplified, rectified, filtered input signals make the drive capability of the output signals more stable and stronger. With this 5-axis breakout board, any 1-5 Microstepper driver controllers can be directly controlled by PC via the MACH3, KCAM4, WinPc Light etc. CNC software.
The M335 is a high performance microstepping driver with low price. The M335 adopts single-chip PWM bipolar sinusoidal chopper to ensure low vibration and high efficiency. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, so the Nema16, Nema17, Nema23 stepper motors with a 0.5A-3.5A current will be suitable.
In short, you will get more benefits from the Kit on CNC work. Please purchase this kit with confidence.
Features
I. 5-Axis Breakout Board
High performance, cost-effective.
All the signals are opto-isolated
which can protect your computer.
5-input interfaces
for the Limits, Emergence-Stop, Cutter alignment etc.
Wide input voltage range: 12-24V, and with anti-reverse function.
One relay output control interface
, accessed by the spindle motor or the air pump, water pump, etc.
Output 0-10V analog voltage
for inverter to control the spindle speed.
II. M335 Stepper Driver
Low cost, Non-creeping phenomenon under low speed. Low noise and non-resonant region.
Supply voltage up to
30V DC
.
Output current up to
3.5A
.
Suitable for 2-phase and 4-phase motors.
High speed optoelectronic isolation signal input.
1, 2, 8, 16 adjustable micro step control for more accurate and smoother motor running.
Automatic idle-current reduction
.
Protection of power reversal.
Applications
Suitable for a variety of small sized automation equipment and instruments. Such as engraving machine, marking machine, cutting machine, laser typesetting, plotters, CNC machine tools, handling the devices.
Suitable for a wide range of stepping motors, from NEMA size 16/17/23.
Power Supply Selection
Voltage Selection
12-24V DC power supply for Nema 16/17 stepper motors.
24-30V DC power supply for Nema 23 stepper motors.
(High (≥ 30V) voltage will burn out the chips or stepper motors!!! Please be careful in choosing power supply.)
Current Selection
Output current of the power supply can be calculated by the following formula .
Output current = Rated current of your stepper motors x quantity + 2A.
If the supply current is too low for the drivers, it will easily burn the drivers.
Please SHUT DOWN the power before you plug or unplug the connectors and adjust the DIP Switches to avoid burning up the board.
M335 DIP-Switch Settings
Microstep Resolution Setting
Microstep resolution
SW1
SW2
1
OFF
OFF
1/2
ON
OFF
1/8
ON
OFF
1/16
ON
ON
Decay Mode Setting
Decay Mode
SW5
SW6
No Decay
OFF
OFF
Slow Decay
ON
OFF
Medium Speed Decay
OFF
ON
Fast Decay
ON
ON
Output Current Setting
SW3
SW4
Full Current
Auto Half Current
Peak Current
RMS
Peak Current
RMS
OFF
OFF
3A
2.14A
1.5A
1.07A
ON
OFF
2.25A
1.6A
0.6A
0.42A
OFF
ON
1.5A
1.07A
1.5A
1.07A
ON
ON
0.6A
0.42A
0.6A
0.42A
Interface Instructions
Connection Diagram
Specifications
Electrical properties of Breakout board(ambient temperature Tj = 25?C)
Input Voltage
Get power from PC via USB port and 12-24V power supply(optional)
Drive type
Pulse and Direction Signal Control
Suitable Microstep Driver
2 Phase Microstep Driver
Net weight
Approx 75g
Dimensions
90*70*20mm (L*W*H)
Electrical Specifications Of M335 Microstepper Driver
Input Voltage
12V ~ 30V(Peak) DC
Output Current
0.5A ~ 3.5A (Peak)
Drive Type
Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper)
Suitable Motor
Nema16, Nema17, Nema23
Isolation Resistance
500MΩ
Operationg Environment & Other Specifications Of M335 Microstepper Driver
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0 °C ~ 50°C (32°F ~ 122°F)
Humidity
40%RH ~ 90%RH
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20 °C ~ 125°C (-4°F ~ 257°F)
Total Weight
Approx. 200g
Dimensions
97*75*35mm
Specifications of Switching Power Supply
Input Voltage
100-120VAC and 200-240VAC by Switch
Input frequency
50/60Hz
Output voltage
24V
Total current
15A
Vout adjustable range
24V±10%
Size
210*115*50mm
Weight
1100g
Specifications of Stepper Motor
Model
57BYGH56-401A
Shaft
Single Shaft (Diameter:6.35mm; Length:21mm)
Rated Current
2.8A/Phase
Step angle
1.8°±5%
Phase
2 Phases
Phase resistance
0.9x(1+10%)Ω/Phase
Phase inductance
2.5x(1+20%)mH/Phase
Holding torque
1.26Nm (Approx. 175 Oz-in)
Positioning torque
300gf.cm
Weight
0.7Kg/Piece
Content
Shipment & Duties-and-Taxes
Service
Estimated Delivery Time
Country/Region
Standard
(Business Days)
Express
(Business Days)
UK, EU (27 Countries)
6 - 12
4 - 6
Other European Countries
6 - 15
4 - 7
USA, Canada, Mexico
5 - 10
3 - 5
Australia, New Zealand, South Asia, East Asia
7 - 12
3 - 5
South America, Other Countries/ Regions
15 - 25
varying
Remarks
• Usually, we dispatch your order within
ONE to Three WORKING DAYs
upon receipt of full payment when stock lasts.
• Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
•
For fixed-time delivery or any special needs
, please do contact and confirm with us BEFORE placing order.
Duties-and-Taxes
• Under EU VAT rules, all goods sold to EU are subject to VAT at local rate.
• Starting 1 July 2021, eBay will collect VAT on certain orders delivered to EU addresses, on behalf of customers local tax authorities. When you see VAT is included/collected on invoice after cleared payment, you can just wait for the parcel to arrive at your door. Estimated delivery time is 4-12 business days, varies between destination countries and delivery services chosen.
• For orders above a certian value, eBay will not collect VAT at checkout, buyers are required to declare and pay tax at point of import.
To facilitate smooth customs clearance, we work with world's leading international couriers (i.e. FedEx, DHL) to ship your parcel via commercial grade express delivery service. The courier will properly handle customs duty and tax declaration when importing the parcel. You don't need to contact or visit customs/tax office in person. All you need to do is to pay your tax fees on delivery. Parcels will be delivered within 4-6 business days to most EU addresses under such arrangement.
Satisfaction Guaranteed
30 Days Money Back Guarantee
If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message)
within 30 days
of receipt of goods for return & refund guidance.
Free Replacement
If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
We provide
ONE YEAR warranty
on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
• All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement
: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.
Image Gallery
Description
Specification
What's In
Service