DIY TB6600HG Stepper Driver CNC Kit 3 Axis Nema24 Stepper Motor Display & Handle

Description

Frist-Supply
World Shipping
Money Back Guarantee
DIY TB6600HG Stepper Driver CNC Kit 3 Axis Nema24 Stepper Motor Display & Handle
/6
Description
DIY CNC Kit 3 Axis: The Latest 3rd Generation 5 Axis Breakout Board Set (BCD-S)
2x 360W 36V10A Switching Power Supply +3x TB6600HG Microstep Drivers
3x Nema24 3.3Nm/467 Oz-in 60BYGH100-401A Stepper Motors
Descriptions
The latest 3rd generation breakout board has been upgraded to the intelligent, professional and industrial-level interface board set by re-designing the PCB board, embedding intelligent memory chip (professional version) and upgrading the external manual control tools (control pad and display panel). The re-designing the PCB board will make the breakout board control the microstep drivers more smoothly with lower noise. Actually, the 3rd generation breakout board set has two types of versions, one is the
standard version
, and another is the
professional version
. Compare to the standard version, the professional version mainly has two more functions than the standard version, one is the "
computer G-code recording function
" , and another is the "
manual programing function
" . Except these two functions, these two types of versions have no other differences.
With the embedded intelligent memory chip, the professional version of this 3rd generation 5 Axis breakout board can easily record MAXIMUM 4 Axis' (X, Y, Z, A Axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc..) of the computer, and then rerun the recorded G-code to make the stepper motor work without the computer any more.
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver.
In short, the qualities and functions of the new 3rd generation advanced 5 axis breakout board are revolutionized from the previous version. With this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchuse this kit with confidence.
The item you are watching is the 5 Axis Standard Version (BCD-S), if you need the professional version, please feel free to contact with us.
Features
I. 3G 5 Axis Breakout Board
High performance, cost-effective.
To manually control the stepper motor, both of the standard and professional drivers have been equipped with the display panel and control pad.
Automatically identify both of the computer and control pad, functions of the computer and control pad can be switched intelligently for each other without any interference.
Display panel can
real-time trail the running path of G-Code
on the computer or input by the control pad, and then completely and synchronously display the changing of MAXIMUM FOUR axis'(X, Y, Z A axis etc.) values on its screen, it is
completely synchronous
with the values' changing on the FOUR coordinates of Mach3.
Automatically finish
Tool-settings on X, Y, Z Axis via the control pad, without the support of the computer.
Both of the standard version and professional version are compatible with the Mach2, Mach3(Default Software),
LinuxCNC(EMC2), KCAM4 CNC Software
, etc.. Besides, the professional version also can automatically trail the path running path of G-Code from the CNC software (e.g. Mach3, EMC2, KCAM4, etc.) of the computer and record the G-code into the memory chip; Easy to repeatedly run the G-code to control the stepper motors without computer.
The professional version also supports manual programming via the control pad, as long as input the required values on one axis and record them in the memory chip of the driver, and then run these recorded values to drive the axis to make linear motion, widely used on RBI machine, Conveyor and so on.
Two ways to get power, 5V DC power supply or USB port to get power from PC directly.
Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market.
Automatic circuit protections function when the wirings between the breakout board and microstep drivers are incorrect.
With
Relay output control interface
, available to control the spindle motor, air pump, water pump, etc..
5-axis work LED display, visually display the working condition of the stepper driver controller.
5 Types of input control in manual control interface, to set
Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool
.
II. TB6600HG Stepper Driver Board Controller
High performance, cost-effective.
Automatic idle-current reduction.
Supply voltage up to 45V DC.
Output current up to 5.0A.
Suitable for 2-phase and 4-phase motors.
High speed optoelectronic isolation signal input.
Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.
Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually.
Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
III. Stepper Motor 57BYGH112-401A
Applications
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
Suitable for a wide range of stepping motors, from NEMA size 17 to 34.
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc..
For processing various pattern mould.
TB6600HG DIP-Switch Settings
I. DIP-Switch Instructions
II. DIP-Switch Settings Diagram
Output Current
SW1
SW2
SW3
0.2A
ON
ON
ON
0.6A
OFF
ON
ON
1.2A
ON
OFF
ON
1.8A
OFF
OFF
ON
2.5A
ON
ON
OFF
3.3A
OFF
ON
OFF
4.2A
ON
OFF
OFF
5.0A
OFF
OFF
OFF
Microstep Mode
SW4
SW5
SW6
N/A
ON
ON
ON
1(Full Step)
OFF
ON
ON
2
ON
OFF
ON
2
OFF
OFF
ON
4
ON
ON
OFF
8
OFF
ON
OFF
16
ON
OFF
OFF
N/A
OFF
OFF
OFF
Interface Instructions
Connection Diagrams
Specifications
Electrical Specifications of Breakout board
Input Voltage
5V DC via power adapter or directly get power from PC via USB port
Version Type
Standard version
Drive Type
Pulse + Direction + Enable Signal Control
Suitable Microstep Driver
2 Phase, 3 Phase, 4 Phase Microstep Driver (M542/M542H/MA860H/3MA2290 etc.)
Net Weight
170g (Breakout Board + Display Panel)
Dimensions
110*110*25mm
Operationg Environment & Other Specifications of Breakout Board
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0 °C ~ 50°C (32°F ~ 122°F)
Humidity
40%RH ~ 90%RH
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20 °C ~ 65°C (-4°F ~ 149°F)
Total Weight
Approx. 275g (Breakout Board + Control Pad + Display Panel)
Electrical Specifications Of TB6600HG Stepper Driver
Input Voltage
12V ~ 45V(Peak) DC
Output Current
0.2A ~ 5.0A (Peak)
Drive Type
Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper)
Suitable Motor
Nema17, Nema23, Nema24, Small-sized Nema34 (Rated current: 0.2A-5.0A)
Net Weight
250g
Dimensions
105*85*35mm
Operationg Environment & Other Specifications Of TB6600HG Stepper Driver
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0 °C ~ 50°C (32°F ~ 122°F)
Humidity
40%RH ~ 90%RH
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20 °C ~ 65°C (-4°F ~ 149°F)
Total Weight
Approx. 300g
Specifications Of Switching Power Supply
Input Voltage
90-132VAC/180-264VAC by switch
Input Frequency
47~63Hz
Output Voltage
36V
Total Current
10A
Vout Adjustable Range
36V±10%
Size
215*115*50mm
Weight
1100g
Specifications of Stepper Motor
Model
60BYGH100-401A
Shaft
Single Shaft (Diameter:8mm; Length:21mm)
Rated Current
4.2A/Phase
Rated Voltage
3.36V
Step Angle
1.8°±5%
Phase
2 Phases
Phase Resistance
0.8x(1+10%)Ω/Phase
Phase Inductance
4.0x(1+20%)mH/Phase
Holding Torque
3.3Nm (Approx. 467 Oz-in)
Positioning Torque
800gf.cm
Insulation Resistance
≥100MΩ (500VDC)
Insulation Class
Class B
Weight
2.0Kg/Piece
Content
3 x 1 Axis TB6600HG Microstep Driver Board (TB1H)
1 x 3G 5 Axis Breakout Board (Standard Version)
1 x Control Pad (Standard Version)
1 x Display Panel (Build-in Breakout Board)
1 x DB25 LPT Parallel Cable
3 x 60BYGH100-401A Stepper Motors
2 x 36V10A Power Supply
1 x USB Power Cable
1 x CD Driver
Shipping
Payment
Service
Estimated Delivery Time
(Subject to Stock Availability)
Country/Region
Standard
(Business Days)
Express
(Business Days)
USA, Canada
5 - 10
3 - 5
Australia, New Zealand, South Asia, East Asia
7 - 12
3 - 5
UK, France, Germany and Other EU Countries
(excluding Italy)
7 - 15
4 - 6
South America, Italy, Other Countries/ Regions
15 - 25
varying
We sell items to most countries of the world. To provide the most satisfying shipping experience, your order may be allocated to and processed in the best-match fulfillment center.
Remarks
• Usually, we dispatch your order within
ONE WORKING DAY
upon receipt of full payment when stock lasts.
• Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
•
For fixed-time delivery or any special needs
, please do contact and confirm with us BEFORE placing order.
Safe and Easy Payment
PayPal
• We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with
NO surcharge
)
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
Remarks
• Payment is required
within 5 days
after auction ends.
• All sales are final. Shipping and handling charges are not negotiable.
• Your
PayPal shipping address will be used for delivery BY DEFAULT
unless otherwise informed.
• Please double-check to make sure your PayPal shipping address is correct before making payment.
Satisfaction Guaranteed
30 Days Money Back Guarantee
If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message)
within 30 days
of receipt of goods for return & refund guidance.
Free Replacement
If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
We provide
ONE YEAR warranty
on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
• All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement
: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.
Image Gallery
Description
Specification
What's In
Service