EtherCAT NEMA 34 Motion Control System with Stepper Motor Power Supply CNC Kits

Description

Overview
This item is stocked & dispatched from Chicago US.
Provide technical support in USA.
One year warranty.
EtherCAT NEMA 34 Motion Control System:
We worked with Newfangled Solutions and KINGSTAR, built this new CNC EtherCAT Motion Control System. It is fully Pre-wired, tested and configured with Computer. So you do not need any Breakout Board, Ethernet Board. You do not need to wire them any more.
We can configure 4 Axis, 5 Axis, 6 Axis .... to N Axis
We can change form 1.5 meter cable to other length as you need.
Package included:
-- 1 Pcs Rebuilt Computer with 19 inch Monitor:
8GB of RAM,  5
00 GB Hard Drive,
Windows 10 Pro x64
-- 1 Pcs Mach4 CNC EtherCAT Software License (You can choose different Mach4 Screen) from
ArtSoft software
-- 1 Pcs Kingstar’s RTX64 Runtime License and KINGSTAR EtherCAT  License ( You do not need any Breakout Board, Ethernet board any more) from
KINGSTAR
--3 Pcs NEMA 34 Stepper Motors (1200 Oz-in) with 1.5 Meter Cable (KL34H2120-60-4B)
-- 3 Pcs EtherCAT Stepper Driver with 1.5 Meter Cable (KL-8082E-C)
-- 1 Pcs 65V/20A Power Supply
-- 3 Pcs Proximity Switch with 1.5 Meter Cable
-- 1 Pcs E - Stop with 1.5 Meter Cable
-- 1PCS 12V/5A Power Supply for the limit switch
Features
NEMA34 1200oz/in Single Shaft Stepper Motor (KL34H2120-50-4AC) with 1.5 Meter Cable
1200 oz In. Hybrid Stepper Motor with 12 feet cable and connector
NO need to wire the cable
1.8° /200 Steps Per Rev.
6 Amps Current Per Phase ( Bipolar Parallel)
4-Wire  Bipolar,
1/2" shaft
Inductance:  6mH
A+ to pin1
A- to pin2
B+ to pin3
B- to pin4
EtherCAT Stepper Driver, KL-8082E-C
Support CoE control and CiA 402 protocols
Supported Operation Modes:  CSP, PP, PV, HMCSP, PP, PV, HM
Maximum communication rate of 100 Mbps
Simplicity & High reliability
20VDC to 80VDC input voltage
Current (2.1A to 8.2A), 2 phase
Power Nema 23-34 stepper motors
Excellent performance
High reliability
Competitive cost
Digital Input 5
Digital output 2
EtherCAT Compare with Step/Direction
1. Stronger anti-disturbance ability
Traditional step/direction transmission cables have lower reliability for the reason of EMC interference, whereas EtherCAT communication with shielded cables have stronger anti-interference ability , and inbuilt error detection. Limit and handling mechanisms can also bring more reliable transmission and longer communication distance.
2. Enhanced performance
EtherCAT is the fastest industrial Ethernet technology, and it also synchronizes with nanosecond accuracy. This is huge benefit for all applications in which target system is controlled or measured via the bus system.
3. Simple wiring and long communication distance
In step/direction control mode, the controller/PLC needs to connect with each drive to second control signals, which may lead to intensive signal cables and wiring complexity if many drivers are required. While in EtherCAT applications, the controller/PLC just need to connect with one of the drivers and then line topology with others. Additionally, the EtherCAT communication allows longer distance up to 100 meters maximum.
3. Lower cost
EtherCAT delivery has the features of industrial Ethernet at a price similar or even below that of traditional control mode. The only hardware required by the master device is an Ethernet port, instead of some expensive interface cards or co-processors. Since EtherCAT doesn't require high-speed pulse modules or other active infrastructure components, the costs for these components and their installation, configuration, and maintenance are also eliminated.
65VDC/20A Switching CNC Power Supply
Input: 110vac or 220vac
Output: 65vdc, 20A
High Efficiency, Low Temperature, Small Size.
Over Load and Short Circuit Protection.
Over Voltage Protection.
about 9 lbs
Inductive Proximity Switch, NPN
Characterized by DC 3 wire type, NPN, NO output type, 0-30V DC working voltage, when proximity switch is close to some target object, it will send out control signal.
Used widely in the machine tool industry, frequency counters and other automatic control system, etc.
Product Name
Proximity Switch Sensor
Model
SN04-N
Wire Type
DC 3 Wire Type (Brown, Black, Blue)
Theory
Inductance Sensor
Output Type
NPN, NO
Output
Switching Transducer
Sensing Distance
4mm
Working Voltage
10-30V DC
Response Frequency
500Hz max
Indicator
Red LED
Size
36 x 18 x 18mm / 1.4" x 0.7" x 0.7" (L*W*H)
Cable Length (Approx.)
110cm / 43.3"
Hole Size
0.9 x 0.4cm / 0.35" x 0.2" (L*W)
Extenal Material
ABS Resin
Net Weight
34g
Color
Black, Green
E-stop Switch
Panel mount
Both normally closed and normally open functions.
On pressing the top, the button latches down, and can be released by rotating the top 1/2 turn, and it pops back up to the operate position
120V/10A
Switching Power 12V/5A 110V/220VAC
Input: AC110V/220V
Output: DC 12V 5 A
Output Power: 60 W
Frequency: 50/60Hz
Screw Terminal Number: 5
Fix Screw Hole Diameter: 2.5mm(0.1 inch)
Working temperature: -40~65 degree Celsius
Storage Temperature: -20C~60CHumidity: 20%~90%RH  Non-Condensation
Start Rise Hold Time:200ms 100ms 30ms
Material: Metal, Electronic Parts
Size:3.34 inch x 2.28 inch x 1.37 inch/85mm*58mm*35mm(L*W*H)
Main Color: Silver Tone
Net Weight : 132g
Connection:
L, N: AC power input
COM: DC power output  -
V: DC power output  +
+V / ADJ: Adjust the output voltage (15%)
Testing video:
EtherCat  Nema 23 Kits for CNC Machine (No Breakout Board and Ethernet board)
Video will open in a new window
Using the mobile app? Copy this link into your browser:
Why Choose Us?
Fast Delivery Around The World:
Only one business day to ship your package by using USPS, FedEx Express.
High Quality With Global Standards
Ensuring each and every item purchased meets global quality standards.
Over 10,000 Products In Stock:
Our veteran engineers selected hundreds of typical models from our sales records, and we stocked in our warehouse. More than 10,000 products are ready to ship
Reliable Customer Service & Technical Support in USA:
We have engineers in US ready to answer all your questions through Telephone, Email and also online Live Chat. We also provide one year warranty for all products we sold.