Gecko G540 Controller (Rev 8) & 48v 12.5a 600w & 3 600oz in Motors & UC-100

Description

This package features the Gecko G540 motion controller (Revision 8 Model), and a
48v 12.5a 110/220v selectable power supply to support the worlds electrical outputs
.
Read this listing carefully as I cover everything in great detail.
I made a video series on the breakdown of the users manual as well as an overview of the drive itself explaining tips when assembling your controller. Your spending the money, and I'm providing you my years of knowledge to assist you in making your controller assembly a painless process. Please read the entire listing, and review the videos for a complete simplified breakdown of this elite bulletproof driver. Other videos are on my channel discuss the CNC overview. I encourage you to educate yourself with the facts on what your getting into with micro manufacturing. Please set time aside to watch these as they aren't short because I cover the drive completely.
Gecko G540 Overview Part 1 Users Manual Breakdown -
https://www.youtube.com/watch?v=WkP0ql-dT6s
Gecko G540 Overview Part 2 The Drive, And Tips When Building Your Controller -
https://www.youtube.com/watch?v=oSw6IxFvLa4
This package features SOLDERLESS motor connectors, and 3 10ft. DB9 motor cables. Simply screw your motors into the connectors, attach your resistors, and make chips!
The motor cables are totally premade, and plug and play ZERO soldering!!* The motor cables included in this package are rated to 300v, and 80c.
Also included:
3 Nema 23 600oz in steppers 1/4in double shaft (6.35mm) (Designed in house for optimal performance with the G540)
1 E-stop switch (twist to release)
(Rating is 5A/250Volt 5A/220Volt)
1 UC-100 USB parallel port converter to  Attach The Gecko To your Computer making your G540 to function on USB without any limitations using Windows operating systems 32bit or 64bit. Works excellent with Windows 7.
This means you can run Mach3 on your Windows 7 or 8 PC!! I can add CNC drives new software for an additional . It's easier to configure then Mach3 and performs excellent for a fraction of the price.
Gecko's rule for correct power supply selection is your motors amperage multiplied by .6 . This means to power four 3.5a rated motors correctly you need an 8.4a power supply. This leaves a large amount of backup power available with this power selection.
*Due to such high turnover on these. If they are on order they wil ship within 4 days. There's a reason these don't last long with this package*.
Please check my other auctions.
If you are going to purchase more than one item please message me to combine shipping.
USPS shipping is FREE in the US.
Intenational shipping welcome with adjusted shipping price. Please message me prior to bidding.
Gecko G540 DSP Specs
Four 10-Microstep motor drives
0 to 3.5A rated phase current
18VDC to 50VDC supply voltage
Mid-band resonance compensation
Auto standby current (70% current)
Short-circuit protected
Optoisolation on all LPT signal pins
Two 1A at 0 to 50VDC rated outputs
Four SPST to GND inputs (TTL)
FAULT indicator LED,signal to PC
POWER indicator LED
I-SET resistor on motor connector
TRIM adjust for motor smoothness
Panel mount (5.7” by2.4” hole dim.)
Anodized aluminum package
No heatsink needed below 40C ambient
Easy to service, removable drives
Modular PCB design with no internal wires
10kHz watchdog timer (charge pump)
Optoisolated analog output for a VFD drive
Conservative ratings, premium components
Comes with four backshells and four DB9 solder cup connector