Gecko G540 EMI Shielding Coated Pre-Machined Aluminum Enclosure (Master Edition)

Description

Please read, and review the entire listing, and video to understand exactly what your purchasing.
This listing is one of my aluminum Gecko Drive G540 pre-machined
master edition
enclosure packages.
This unit utilizes as EMI shielded coating, and is not gold anodized
.
The enclosure's dimensions are 12in long, by 12in wide, by 4in high.
This enclosure includes the essentials for your electronics chassis including
LED power switch, E-stop twist, and release switch, IEC power input port, Fuse, Fuse Holder, 110v Power Input,
Tripp Lite IEC power cord with Lifetime warranty, 50 wire ties, 20 wire hold downs for wire management, and screws for the unit.
The unit also includes the following modifications/accessories making it the most advanced G540 enclosure package on the market.  If you want the option to add all the accessories the G540 supports this enclosure package is for you.
6-GX-16 male panel mount ports machined into the rear panel to support all four inputs, and two outputs the G540 has. The enclosure includes 5 3 pin GX-16 male panel mounts to be used for switches, and accessories, and a single GX-16 6 pin male panel mount to be used for your relay integration. 6 dust covers are included to keep the ports clean when not in use.
6 matching GX-16 female plugs to install on the included cable to build switch/accessory, and relay cables.
90ft of 22awg 2 lead double shielded cable to allow the end user to build 15ft switch/accessory cables
20ft of 20awg 5 lead double shielded cable for relay, and VFD speed control (
This cable will allow you turn your spindle on, and off as well as manipulating the speed of the spindle in a single cable connector combination.
)
1-Power supply V- terminal splitter with tool less mounts to prevent
"Daisy Chaining"
for relay, and switch hookups. 10 solder ring terminals will be included to allow the end user the option of screw terminal, or ring terminal use for hook up.
1-Ground buss bar for proper shield drain termination of your cable drain leads. 10 solder ring terminals will be included to allow the end user the option of screw terminal, or ring terminal use for hook up.
1-48v 30a relay with tool less mounts, and required connectors that will allow you to cycle your spindle on, and off from Mach3 motion control software
4-snap switches with detailed ratings below to be used for limit/home switches
Approvals: UL, VDE, CSA, CE
Voltage & Load Rating: 15A 125/250VAC, 0.6A 125VDC, 0.3A 250VDC
Operating Temp.: -11 deg.F to 180 deg.F (-25 deg.C to 80 deg.C)
Max. Humidity: 85% rel.
Contact Resistance: <
100m
ω
Mechanical/electrical Life: > 100,000 cycles
Please review the whole video overview of this enclosure package below as its extensive.
Gecko G540 Enclosure Package Master DIY Edition... - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Shipping in the US is
FREE
and
will be shipped via UPS Ground with signature due to the value involved. If you require expedited shipping, please contact me for a quote.
All my international orders are handled through eBay's Global Shipping Program as they offer us both the best protection against loss, and damages. Please review their policy for a shipping quote based on your specific location as they don't disclose it to me.