H&R Coilover Suspension RSS-Monotube Clubsport RSS-16-338-1/1 for MINI Mini

Description

H&R Coilover Suspension RSS-Monotube Clubsport RSS-16-338-1/1 for MINI Mini
H&R Monotube coilovers offer race-bred performance without sacrificing ride comfort. German-made gas shock absorbers built to H&R's rigid specifications are combined with H&R sport or race progressive rate springs for optimum ride quality on the street and uncompromising performance at the track. Like all H&R coilovers, these Monotube coilovers feature a threaded shock body that allows virtually infinite ride height adjustments to suit street or track use.
Monotube gas shock absorbers for precise handling response
Inverted design reduces unsprung weight for precise handling
Trapezoid threaded shock body for virtually infinite height adjustment
Zinc-phosphate coated shock tubes offer an attractive finish and corrosion protection
H&R precision wound coil springs
Adjustment wrenches included
Extensive testing in accordance with the German TÜV
Engineered and munfactured in Germany
Each coilover shock is custom valved to work in connection with a precision-engineered H&R spring, creating a finely tuned suspension system. The individual height adjustment results in a lower center of gravity and improved performance and control. Using premium quality materials, H&R engineers fine-tune each coil over shock with a progressive rate spring to ensure better handling and premium ride comfort.
Height adjustable (not hardness adjustable)
17.) Adjustable suspension kit is height adjustable within the dimensions as specified in the TÜV-report.
18.) Attention: Rasp off the protrusion of the front axle washer or use new OE washer with round bore. Properly tie up the shock absorber wiring after installing the connectors. After fitment of the suspension the controller (OE-ECU) must be reprogrammed (to the status of models without PASM)!!!
Please note additional information and vehicle-specific technical notes!
Version Clubsport.
"The minimum clearance between tires and suspension/body parts is 5 mm. If the clearance is less than 5 mm it has to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."
Lowering beyond the dimensions given in the type approval may result in damage. These damages are not covered by H&R.
This item fits for:
Manufacturer
Model
Lowering in mm (FA/RA)
Axle load (FA/RA)
MINI
MINI (R50 R53)
40-60mm/30-50mm