KEYESTUDIO DC L298P Motor Driver Expansion Module Shield 2A V2.0 for Arduino

Description

Store category
Sign Up Now !
You may also like
KEYESTUDIO DC L298P Motor Driver Expansion Module Shield 2A V2.0 for Arduino
Product Description
wiki.keyestudio.com/KS0435_Keyestudio_Motor_Drive_Shield_V2
There are many ways to drive the motor. Our robot uses the most commonly used L298P solution.
L298P is an excellent high-power motor driver IC produced by STMicroelectronics. It can directly drive DC motors, two-phase and four-phase stepping motors. The driving current up to 2A, and output terminal of motor adopts eight high-speed Schottky diodes as protection.
We have designed the motor driver shield V2 based on the L298P circuit.
The stackable design can make it be plugged directly into the Arduino, reducing the technical difficulty of using and driving the motor.
Direct stack the motor driver shield onto UNO R3 board, after the BAT is powered on, turn the Slide button ON, to supply the power for both keyestudio motor driver shield V2 and UNO R3 board.
For simple wiring, the motor driver shield comes with anti-reverse PH2.0- (2P/3P/4P/ 5P) interfaces. When connecting the motor, power supply and sensor modules, you just need to plug in directly.
The Bluetooth interface on the motor driver shield is fully compatible with keyestudio HM-10 Bluetooth module. When connecting, just plug HM-10 Bluetooth -Compatible Control module into the corresponding interface.
At the same time, the motor drive shield has brought out extra digital and analog ports in 2.54mm pin headers, so that you can continue to add other sensors for experiments extension.
The motor drive shield can access to 4 DC motors, defaulted by jumper connection. The motor connector A and A1, connector B and B1 are separately in parallel.
The 8 jumpers can be applied to control the turning direction of 4 motors.
For instance, if change the 2 jumpers near the motor A connector from horizontal connection to vertical connection, the turning direction of motor A is opposite to the original rotation direction.
Technical Details
Logic part input voltage: DC5V
Driving part input voltage: DC 7-12V
Logic part working current: <36mA
Driving part working current: <2A
Maximum power dissipation: 25W (T=75℃)
Working temperature: -25℃～＋130℃
White connector: PH2.0- (2P/3P/4P/ 5P)
Dimensions: 66mm*55mm*18mm
Weight: 25.2g
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
My shop has many arduino /
Micro:Bit /
Raspberry Pi kits.
If you have any questions about the item, please contact me via eBay message.
Delivery details
It takes 6-13 working days to arrive most European countries using standard shipping.
Some European island countries, overseas territories and South American countries need to arrive in 15-35 working days.
For urgent parcel, you can email us and choose Fedex, DHL, UPS, EMS etc., but you need to pay extra fee.
Terms of sales
We absolutely stand behind our products. All of our items will be checked and tested before shipment to ensure 100% performance.
We also offer 30 day money back guarantee if you are unsatisfied for any reason whatsoever. We will refund the entire cost of the item not including the shipping and insurance charges. Our aim is 100% customer satisfaction!
If you are unclear about product usage, please feel free to contact us.
We will offer your detailed instructions for use.
About us
Contact us
Your feedback is very important for us, if you are satisfied with our products, please give us good feedback. Of course, we will give you praise too.
If you are not satisfied with our products or haven't receive your item in estimated delivery time,
Please don't hesitate to contact us via ebay message. Please don't open a case or leaving a negative feedback before
contacting us, we will always do our best to help solve your problem and offer you a satisfactory response. Thank you very much for your support and understanding.
Payment
Shipping
Return policy
About us