NEW2020!!! Metal Detector Fortune S. FM transmitter latest metal detector.

Description

Metal Detector Fortune S, FM Transmitter
Fortune S FM transmitter - a professional metal detector, which was the last device from the Fortune line of metal detectors, operates on the principle of VLF (Very Low Frequency), at low frequencies, from 5 to 30 kHz. Added the ability to connect dual-frequency coils
The Fortune S / Fortune S metal detector with FM transmitter is the professional metal detector that was the last device from the Fortune range of metal detectors. It contains all the best functions of Fortuna PRO and Fortune M3, Fortune pro2 devices, which made it even faster and more ergonomic.
"FORTUNE-S", works on the principle of VLF (Very Low Frequency), on
low frequencies, from 5 to 30 kHz.
The main differences between the Fortune S metal detector and its predecessors:
Thanks to the use of two processors and software optimization, the device has become much faster than its predecessors. Speed ​​and separation increase the tenacity of finds.
Fortune S does not need a sensor balancing module. The residual imbalance of the sensor up to 4.3V does not affect the operation of the device.
Additionally, the "Analog Search" mode has been introduced.
Now you can connect dual-frequency coils. A dual frequency coil comes with a metal detector.
An FM modulator is used for use with FM headphones.
Unlike MD Fortuna-Pro, an LCD display with white backlight is used, which is convenient when working in the sun.
Fortune S is quite simple to operate, and at the same time a rather flexible device, it will be very convenient in terms of working on any soil, automatic ground offsets are fast and accurate, however, the display constantly displays the signal from the ground in the form of a marker, as well as the number soil phase is constantly displayed. Now it is clearly visible that the soil, for example, has changed and in which direction it should be moved manually, or rebalanced automatically, if necessary.
The speed of work is impressive, as is the separation. The speed of this device allows you to search in rather weedy places, distinguishing and discriminating against unwanted targets. And the high sensitivity of the device will allow you to successfully search even on a knocked out area.
The device is multi-frequency, with it you can use different coils with different frequencies, as well as dual-frequency coils.
The ability to mask, exclude unwanted metal from the search. For example, exclude iron.
Specifications:
Discrimination visual indication: VDI (VDI) number, synograph, dynamic signal strength scale.
To select custom sensors, there are 6 profiles.
Sound scheme, has the choice of setting frequencies according to tonality: 3 tones, 5 tones, 11 tones
or 90 tones.
Sound scheme, has the choice of setting frequencies according to tonality: 3 tones, 5 tones, 11 tones
or 90 tones.
Separate volume, for purposes of ferrous metal, non-ferrous and medium sectors.
The middle sector is customizable, scoring can be configured from 00 to -45g. a shift
on VDI in the black sector. The middle sector has its own tone. Setting step 5
degrees.
Sound scheme, supports stereo or mono mode.
Sound output to built-in speaker, wired headphones or FM
receiver. FM modulator in the device, has frequency stabilization and can work in
frequency range from 70 to 108 MHz. Supports stereo or mono mode. Is available
the ability to switch from left to right or to revolution, outputting sound to headphones
or FM headphones, in stereo. Separate setting of the duration of the sound signal for black or color targets.
Fonscan option, customizable tonality.
Added "Beach" mode to search for fine gold.
Ground balance: manual, automatic.
Ferrite tuning: manual,
FM transmitter, for connecting wireless headphones.
Signal processing speed: very high.
Sensor unbalance indication.
There is no need for a sensor balancing module. The residual imbalance of the sensor up to 4.3V does not affect the operation of the device.
Battery Discharge Indication
Sensitivity adjustment
Masks The ability to mask unwanted metal.
Several search algorithms.
Pinpointer.
Tuning the device to the frequency of the existing sensor.
Instrument frequency: 4-20 kHz.
Number of profiles for sensors: Four profiles for different search sensors and an additional 2 profiles for dual frequency.
DD 25 sensor two-frequency (included 10.3 / 14.75 kHz).
Display backlight
LCD 7x4 cm.
Case dimensions: 140 × 99 × 32 mm.
Improved component base used
High block stability
The latest firmware available.
Adjusting the brightness of the display, and quick on / off.
The main parameters of this assembly:
2200 Li-ion battery (real capacity) mAh 3.7V;
collapsible, adjustable rod, the lower part is impact-resistant plastic, the upper part is high-strength aluminum, coated with factory powder paint;
high-quality board, factory-made, double-sided, with a protective mask and plating holes.
For nutrition:
1. In a complete set, the unit is powered by 3.7 V (lithium battery 18650 by 2200 mAh).
2. If the power will be made its own, then it is possible from 2 to 9 V.
3. Power connector for mic 325 2pin plug.
4. The pinout of the sensor connector is as follows:
1 - RX +
2 - RX -
3 - + 5v frequency switching
4 - TX +
5 - TX -
5. Sensor frequency: 10.3 / 14.75 kHz (default).
6. Spacing between TX-RX: 2 kHz.
Detection range of the S / Fortune S metal detector by air:
DD 25 / current 150 mA / frequency spacing 2 kHz / sens 3 / Gain 200%.
5 cop of the: 42 cm.
3 cop  37 cm.
the average detection range by air = 32-57 cm per coin.
large metal objects up to 150-200 cm.
Option AGC (automatic gain control), designed for operational
reducing signal gain from a target that has overload. This option
disconnectable. There is a manual gain for each profile.
There are three modes of the home screen for searching, signal mode, vectograph mode
without accumulation and vectograph mode with accumulation. Accumulation is a mapping
which accumulates on the display. Accumulation can be adjusted in time.
Additional functions:
- pinpoint mode;
- FonScan mode, allows you to search for deep-lying objects (Similar to the PB-CT function)
- The "Shift VDI" mode allows you to pull out low-conductive targets, such as fine gold and metal;
- Added "Beach" mode to search for small gold;
- mode discrimination / all metals;
- adjustment of the signal gain from 0% to 100% (input operational amplifier);
- an audio signal of an overload and display on the display;
- impulse noise filter;
- the ability to set current in TX;
- Ability to use dual-frequency sensors;
- the ability to adjust the bar.
Hot stone rejection filter to close the VDI scale, +80 to
+ 90g, with a notch of one degree.
Automatic tracking of soil (tracking). The option is disabled.
Setting the sensor current for each profile.
Analog mode, signal processing in this mode is faster, not expended
time to display information on the display. Sound is single-tone, with the ability
set your tone. Adjustment of discrimination, smooth.
Contents of delivery:
Functional block of the device.
Sensor.
Collapsible bar.
Battery.
Charger.
Free shipping. Tracking number is provided. I pack it carefully
Worldwide shipping 14-55 business days.
Payment via PayPal.
Please see my other items.
Please feel free to ask me if you have any questions.