Stepper Drive Leadshine Digital Microstep CNC 2 phase DM1182 For Nema34 42 Motor

Description

Store category
Sign Up Now !
You may also like
Stepper Drive Leadshine Digital Microstep CNC 2 phase DM1182 For Nema34 42 Motor
Product Description
DM1182
Leadshine Digital Microstep Driver CNC Stepper Drive 2 phase
2.2~8.2A
60~130VAC
Matching Nema34 42 Motor
Features:
1. Extra-low motor noise offers excellent quietness
2. Anti-Resonance, provides optimum torque and nulls mid-range instability
3. Self-test and Auto-configuration technology, offers optimum responses with different motors
4. Microstep resolutions programmable, from full-step to 102,400 steps/rev
5. Supply voltage up to 150 VAC
6. Output current programmable, from 2.2A to 8.2A
7. Pulse input frequency up to 200 KHz
8. Automatic idle-current reduction
9 .Supports PUL/DIR and CW/CCW modes
Description:
The DM1182 is a high voltage, fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM1182 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM1182 an ideal choice for high requirement applications. .
Pb-Free or CE/UL approved versions optional. Contact
Leadshine
or see more information in its hardware manual please.
Parameters
DM1182
Min
Typical
Max
Unit
Output current
2.2
-
8.2
A
Supply voltage
90
110
130
VAC
Pulse input frequency
7
10
16
mA
Logic signal current
0
-
200
kHz
Isolation resistance
500
Mohm
Connector P1 Configurations
Pin Function
details
PUL+
PUL-
Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each rising or falling edge active (software configurable); 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. In double pulse mode (pulse/pulse) , this input represents clockwise (CW) pulse
，
active both at high level and low level (software configurable). For reliable response, pulse width should be longer than 2.5
μ
s. Series connect resistors for current-limiting when +12V or +24V used. The same as DIR and ENA signals.
DIR+
DIR-
DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; in double-pulse mode (software configurable), this signal is counter-clock (CCW) pulse
，
active both at high level and low level (software configurable). For reliable motion response, DIR signal should be ahead of PUL signal by 5μs at least. 4-5V when DIR-HIGH, 0-0.5V when DIR-LOW. Please note that rotation direction is also related to motor-driver wiring match. Exchanging the connection of two wires for a coil to the driver will reverse motion direction.
ENA+
ENA-
Enable signal: This signal is used for enabling/disabling the driver. High level (NPN control signal, PNP and Differential control signals are on the contrary, namely Low level for enabling.) for enabling the driver and low level for disabling the driver. Usually left UNCONNECTED (ENABLED). When use it, the ENA signal should ahead the PUL signal at least 100ms due to of soft-start feature of the DM1182.
FAULT+, FAULT-
Fault Signal: Open collector fault output. High impedance between FAULT+ and FAULT- during normal operation and low impedance when over-voltage, under-voltage, over-current and phase error protection. MAX: 30VDC,
20mA.
Connector P2 Configurations
Pin function
details
PE
Recommend connect this port to the ground for better safety
AC
AC power supply inputs. If AC input, recommend use isolation transformers with theoretical output voltage of 80~150VAC. DC input range is 113~212VDC
A+,A-
Motor phase A
B+, B-
Motor phase B
Typical connection:
Dimension:
Application:
Suitable for a wide range of stepper motors, from NEMA size 34 to 51. It can be used in various applications such as laser cutters, laser markers, high precision X-Y tables, labeling machines, CNC router, etc. Its unique features make the DM1182 an ideal choice for applications that require both low-speed smoothness and high speed performances.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
Only
Paypal
is accepted.
If you need other payment terms, please leave message to us.
Delivery details
1.Orders will be shipped out within
5 working days once payment received. Please make sure the phone number is valid.
2.We Will ship by DHL, FedEx, UPS, EMS( we will choose the best way to ship the items ASAP).
3.Kindly please note the tax fee and clearance fee are not included in the item price.
4.There will be remote fee if your address is remote area.
Terms of sales
Normally we provide 12 months warranty, some regular items even up to 24 months.Please see the details above.
Products are tested before shipping ,and we guarantee our products are in good working condition.
If the product you received is defective caused by shipping, please contact us before you return to us. We will RESEND the good product to you ASAP or will full refund you the payment.
About us
Fast To Buy
is a worldwide industrial products online store of over million configurable and standard components. We are a leading provider for industrial automation control, CNC machine and electrical equipment. Each product, in which FastToBuy sales online, is subject to a 100% quality control.
we have enough stock, if you want to buy more, please feel free to contact us,we will add the quantity.
Contact us
We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.
We strive to maintain the highest standards of excellence for shopping experience and 100% customer satisfaction!
Positive feedback is very important to us. We sincerely request that you contact us immediately before you give us neutral
or negative
feedback, so that we can satisfactorily solve your concerns.
For anything questions about product, price, shipping or order status, please send ebay message to us.
Feedback