US Ship 3 Axis Nema 34 1805oz.in Stepper Motor & Nema23 425oz CNC Kit CNC Hobby

Description

Overview
This item is stocked & dispatched from Chicago US.
Provide technical support in USA.
One year warranty.
Package Include:
2 pcs Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor (KL-5042E)
2 pcs Nema 23 425oz/in 2.8A Stepper Motor 1/d'' Dual Shaft (KL23H286-20-8B)
1 pc   36V 9.7A 115/230V Switching Power Supply (KL-350-36)
1pcs Digital Stepper Drive 24-80VDC 2.0-6.0A for Nema 17, 23, 24 Stepper Motor (KL-8060E)
1pcs Nema 34 1805oz/in 8.8A Stepper Motor 1/d'' Dual Shaft (KL34H2160-62-8B)
1pcs 48V 7.3A 115/230V Switching Power Supply (KL-350-48)
KL23H286-20-8B Stepper Motor
This 425oz/in NEMA23 stepper motor is well suited to medium sized motion control projects of all types.
425 oz In. Hybrid Motor
1.8° /200 Steps Per Rev.
2.8 Amps Current Per Phase ( Bipolar Parallel)
8-wire  Bi-polar or unipolar,  NEMA 23 Frame
Motor Dimension:

Wire Diagram:
KL-5042E Driver
Applications:
Suitable for a wide range of stepping motors, from NEMA frame size 17 to 34. It can be used invarious kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labelingmachines, and so on. Its unique features make the KL-5042E an ideal solution for applications thatrequire both low-speed smoothness and high speed performances.
Features:
Anti-Resonance, provides optimum torqueand nulls mid-range instability
Motor self-test and parameter auto-setuptechnology, offers optimum responses withdifferent motors
Multi-Stepping allows a low resolution stepinput to produce a higher microstep outputfor smooth system performance
Microstep resolutions programmable, fromfull-step to 102,400 steps/rev
Supply voltage up to +40 VDC
Output current programmable, from 0.5A to4.2A
Pulse input frequency up to 200 KHz TTL compatible and optically isolated input
Automatic idle-current reduction (Reduction rate can be software configured)
Support PUL/DIR and CW/CCW modes
Over-voltage, over-current, phase-errorprotections
KL-350-36 Power Supply
Our metal caged 115V /230V switching CNC power supplies are a low-cost, efficient way to power your stepper and servo motor motion control projects. With a 36V, 9.7 amp output, this PSU is great for small and midsized applications.
Features:
High Efficiency, Low Temperature, Small Size.
Over Load and Short Circuit Protection.
Over Voltage Protection.
Input: 12
0VAC or 220V
KL34H2160-62-8B

KL34H2160-62-8B ½” Dual shaft with flat CNC Stepper Motor.
Powerful NEMA34 stepper motors are capable of precise, high energy positioning of large or high load machinery. With 1805oz/in and 8.8amp power handling, this is among our most powerful steppers.
1805 oz In. Hybrid Motor
1.8° /200 Steps Per Rev.
8.8 Amps Current Per Phase (Bipolar Parallel)
8-wire Bi-polar or unipolar,
NEMA 34 Frame


KL-8060E Driver

This stepper driver is based on a DSP with an advanced control algorithm. It brings a high level of system smoothness, providing optimum torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology offers optimum responses with different motors and is easy-to-use. The driven motors can run with much lower noise, less heating, smoother movement than most of the drivers in the markets. Its unique features make the driver more attractive.
Applications:
KL8060E can be used for 2-phase hybrid stepping motors of NEMA17, 23 and 34 with a phase current of up to 6A, it’s suitable for a wide range of machines, such as X-Y tables labeling machines, laser cutters, engraving machines, and pick-place devices.
Features:
Heat Sink is included.
High Performance, based on DSP Algorithm
Anti-Resonance, provides optimum torque and nulls mid-range instability
Motor auto-identification and parameter auto-configuration technology, offers optimum responses with different motors
Multi-Stepping allows a low resolution step input to produce a higher micro step output for smooth system performance
Microstep resolutions programmable, from full-step to 51,200 steps/rev
Can be set by Dip switch (2,4,8,16,32,64,128,256,5,10,25,50,125,250)
Supply voltage up to +80 VDC
Output current programmable, from 2A to 6A(Can be set by Dip switch too)
Pulse input frequency up to 200 KHz
TTL compatible and optically isolated input
Full or Half Current , Sw4: Off = Half Current
Suitable for 2-phase and 4-phase motors
Support PUL/DIR and CW/CCW modes
Over-voltage, over-current, phase-error protection
KL-350-48 Power Supply

Our metal caged 110V /220V switching CNC power supplies are a low-cost, efficient way to power your stepper and servo motor motion control projects. With a 48V, 7.3Amp output, this PSU is great for small and midsized applications.
Features:
input: 110vac or 220vac
output: 48VDC, 7.3A
High Efficiency, Low Temperature, Small Size.
Over Load and Short Circuit Protection.
Over Voltage Protection.
Why Choose Us?
Fast Delivery Around The World:
Only one business day to ship your package by using USPS, FedEx and UPS.
High Quality With Global Standards
Ensuring each and every item purchased meets global quality standards.
Over 10,000 Products In Stock:
Our veteran engineers selected hundreds of typical models from our sales records, and we stocked in our warehouse. More than 10,000 products are ready to ship
Reliable Customer Service & Technical Support in USA:
We have engineers in US ready to answer all your questions through Telephone, Email and also online Live Chat. We also provide one year warranty for all products we sold.