You are bidding on an Elite Nerf Rayven. It unfortunately suffered from very bad battery corrosion. I did my best to clean this up with vinegar and it's now fully functional but still quite ugly. Luckily, you don't see this when you are actually using the blaster. During this process I found that much of the internal wiring had gone bad so I cut out the unnecessary wiring and bypassed all the electronic locks by soldering in a new piece of wire. The locks are still in there physically in case you want them for something but they aren't tested and aren't attached. You can now rev the blaster without a clip in or with the jam door open. I think this also removes a couple of resistors so in theory it may be a little more powerful; nothing major though. One thing I noticed is that fresh batteries make a big difference. I left in the physical locks so you can't pull the trigger unless there's a mag installed and the rev trigger is depressed. I think these locks are actually useful as they can help prevent you from jamming your blaster. Cosmetically the blaster is in great shape with some minor, but noticeable, signs of use such as light marks, scratches, and/or paint loss. Due to the corrosion and mods I did I must sell AS IS!